CLEAN
Clean surface thoroughly and dry well. If possible clean surface with a mild cleaner and water. Ensure surface is completely free from dust, grease, loose particles and is completely dry.
PREPARE & MEASURE
Prepare the application area by filling in any cracks or holes to ensure it is smooth. Seal porous surfaces. Measure the surface and cut to the desired length. Round the corners with scissors to help them stay secure.
REMOVE
Remove backing paper, touching adhesive sparingly.
PLACE TAPE
Peel back the protective film on one end and apply the tape to the surface. Continue removing the film while pressing the tape firmly onto the surface.
PRESSURE
Once the tape is in place, press it firmly to the surface to ensure maximum adhesion. Apply even pressure starting from the center of the tape strip and working towards the ends. Apply extra pressure to the edges.
12-24 HRS
Give tape 12- 24 hrs to strongly adhere . Be safe out there!
TIPS!
For outdoor use, install the anti-slip tape or stair tread when the temperature is above 50 degrees Fahrenheit (10 degrees Celsius). The installed tape or stair tread can withstand temperatures as low as 14 degrees Fahrenheit (-10 degrees Celsius).
On stair treads, apply the anti-slip tape approximately 0.5 to 1 inch away from the stair edge to prevent premature wear or curling of the tape edge.
Use on all smooth surfaces. We do not recommend applying anti-slip tape over grout lines, gaps, uneven surfaces, or heavily textured surfaces.
